Garrett pd 6500i – Security metal detectors https://www.securitysystem.ae Security metal detectors Sat, 16 Jan 2021 08:04:07 +0000 en-US hourly 1 https://wordpress.org/?v=6.1.7 https://www.securitysystem.ae/wp-content/uploads/2020/11/cropped-securityicon-32x32.png Garrett pd 6500i – Security metal detectors https://www.securitysystem.ae 32 32 Garrett pd 6500i Specification – Professional high-quality walk through metal detector https://www.securitysystem.ae/walk-through-metal-detector/garrett-pd-6500i-specification/ https://www.securitysystem.ae/walk-through-metal-detector/garrett-pd-6500i-specification/#respond Sun, 16 Aug 2020 14:01:24 +0000 https://www.securitysystem.ae/?p=4419

Garrett pd 6500i Specification

07 pd6500i gallery

Garrett Walk Through Detector Specification Comparison

pd6500i specs

PD 6500i™

For maximum performance

pd6500i specs 0

MZ 6100™

Multi-zone power, budget-friendly
Detection Zones 33 zones (left, right and center); visual and remote alarms. 20 independent zones
Multi-Unit Synchronization Synchronization with wired AC power lines or with manual frequency selection for wireless operation Synchronization with wired AC power lines or with manual frequency selection for wireless operation. Auto frequency scan for wireless operation
Visual Displays LED zone indicator lights on both panels. Pace lights on entry side only, with intuitive images. Bright LED indicator lights on entry and exit sides of Panel A (Panel B zone light kit optional). Status lights are individually configurable as pace lights, ready/alarm lights or disabled.
Access Control Eight-button keypad with numerical codes. Keypad lock to control access and to enable/disable the keypad. Ten-button operation with full alpha-numeric 5-digit access code. Enable and disable keypad function with a rocker switch locked inside the detector head.
Passageway Interior Size Width 30″ (0.76 m)
Height 80″ (2.03 m)
Depth 23″ (0.58 m)(28” and 32” versions are also available)
Width 30″ (0.76 m)
Height 80″ (2.03 m)
Depth 23″ (0.58 m)(32” versions are also available)
Overall Exterior Size Width 35″ (0.90 m)
Height 87″ (2.21 m)
Depth 23″ (0.58 m)
Width 35″ (0.90 m)
Height 87″ (2.21 m)
Depth 23″ (0.58 m)
Shipping Size Width 35.5″ (0.90 m)
Height 91.5″ (2.32 m)
Depth 6.25″ (.16 m)
Width 35.5″ (.90 m)
Height 91.5″ (2.32 m)
Depth 6.25″ (.16 m)
Shipping Weight 165 lbs. (74 kg) 151 lbs. (68.5 kg)
Operating Temperatures -4º F (-20º C) to +149º F (65º C); Humidity to 95% non-condensing. -4º F (-20º C) to +140º F (60º C); Humidity to 95% non-condensing.
Power Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 45 watts; no rewiring, switching or adjustments needed. Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 40 watts; no rewiring, switching or adjustments needed.
Regulatory Information Meets international airport standards such as TSA, ECAC, STAC, AENA, CJIAC, DFT. Meets additional standards and requirements such as USMS, NIJ-0601.02, NILECJ. Meets Electrical Safety and Compatibility Requirements for CE, FCC, CSA, IEC, ICNIRP, IEEE. Meets Electrical Safety and Compatibility Requirements for CE, FCC, CSA, IEC, ICNIRP and IEEE. Additional certifications pending.
Weatherproofing Meets IP 55, IP 65, IEC 529 Standard for moisture, foreign matter protection Meets IP 55, IEC 529 Standard for moisture, foreign matter protection
Construction Attractive scratch and mar-resistant laminate. Detection Heads and Support: heavy duty aluminum. Attractive scratch and mar-resistant laminate. Detection Heads and Support: heavy duty aluminum.
Control Outputs Solid state switches (low voltage AC or DC) for operating external alarms and control devices. Optional Relay module connected via RS 485 cable provides NO/NC relay contact
(optional) Remote Control Desktop Remote Control with Zone Indication; personal computer with wired or wireless iC Module; or IR remote Desktop Remote Control with Zone Indication; personal computer with wired or wireless iC Module; or IR remote
(optional) Networking Manage individual or groups of walk throughs and perform statistical analysis of throughput with wired or wireless iC Module and client software. Manage individual or groups of walkthroughs and perform statistical analysis of throughput with wired or wireless iC Module and client software.
Warranty 24 months, limited parts and labor 24 months, limited parts and labor
Product Video

]]>
https://www.securitysystem.ae/walk-through-metal-detector/garrett-pd-6500i-specification/feed/ 0
Garrett pd 6500i price https://www.securitysystem.ae/garrett-pd-6500i/garrett-pd-6500i-price/ https://www.securitysystem.ae/garrett-pd-6500i/garrett-pd-6500i-price/#respond Sun, 16 Aug 2020 13:55:02 +0000 https://www.securitysystem.ae/?p=4417 Garrett pd 6500i price

 

The price of the Garrett pd 6500i walk through metal detector is depend on country which is shipped to, so please contact us to get the price and shipping time, please check the garrett pd 6500i walk through metal detector

07 pd6500i gallery

For calls & Whats-app

00971556673305
00971507740209
00971506099456

]]>
https://www.securitysystem.ae/garrett-pd-6500i/garrett-pd-6500i-price/feed/ 0
PD 6500i Walk through Metal Detector Best US Technology https://www.securitysystem.ae/walk-through-metal-detector/pd-6500i/ https://www.securitysystem.ae/walk-through-metal-detector/pd-6500i/#comments Wed, 08 Jul 2020 15:02:16 +0000 https://www.securitysystem.ae/?p=4111 PD 6500i Walk through Metal Detector

06 pd6500i gallery

Garrett PD 6500i

PD 6500i Walk through Metal Detector

Advanced Security Scanning Technology

Garrett is the industry leader with superior pinpoint detection technology and unmatched discrimination features. The Quick-Q™ technology sets the standard for today’s need to provide a quicker venue access into stadiums, arenas, outdoor events, convention centers and concert halls. This technology has the effectiveness of moving high volumes of patrons through events by reducing line queues and large crowds outside the venue.

When used with Garrett’s enhanced walk-through metal detectors, the Quick-Q™ technology does not require the divestment of cell phones or other small metallic items. This should reduce the number of items divested as fans are screened and improve ingress through-put rates.

Garrett pd 6500i KEY FEATURES

  • Our dual-panel scanning technology offers more accurate detection and discrimination, left-center-right, head-to-toe
  • Quick-Q technology means we quickly speed you through the scanning process and alleviate line queues
  • Crowd reduction outside of each venue
  • Fewer false alarms
  • Faster lines
  • Industry-leading technology
  • This software package does not impact Safety Act certifications or submissions

 

Part No. 1628500 for use with Garrett PD 6500i only

Garrett pd 6500i Walk-Through Caster Sets

Includes two (2) rigid locking casters and two (2) swivel locking casters.

  • Ideal for schools, special events, and stadium use.
    Allows full mobility of PD 6500i walk-through by one person. No Lifting required. Move the detectors to a secure location when not in use and provide an unimpeded exit at the close of an event.
  • Extreme stability combined with portability.
    Two fixed casters with locking devices provide stable detector operation, while two swivel casters with locking devices provide maneuverability. The assembly can be permanently attached to walk through the base.
  • All-terrain environment design.
    3-inch wheels allow movement over any hard surfaces. Durable, powder-coated steel allows use in all types of environmental conditions. For wind speeds up to 20 mph (32 kph). Available with swivels on either 2 or 4 wheels.

Shipping weight: 21 lbs (9.5 kg)
Shipping size: 40 1/4″ x 8 5/8″ x 5″

Garrett PD 6500i Walk through Metal Detector with casters will roll through doors more than 89″ in height without having to tilt the unit.

Battery Modules

These optional battery modules are field install-able assemblies. While recharging, a monitoring circuit allows the batteries to charge in minimal time and then switches to trickle charge to ensure maximum charge without battery damage. The charge status is indicated on the LCD of the Garrett walk-through detector’s control panel and an alarm warns the operator when batteries are low.

Garrett PD 6500i Walk through Metal Detector  Batteries

Lithium Battery Modules

Garrett PD 6500i Battery Module, lithium-ion

  • Recommended for portable applications where the battery is the primary power source.
  • Recommended for high usage application up to 2000 charge cycles.
  • Includes red status light, indicating whether the battery is in the process of charging or is fully charged.
  • Includes a quick change bracket for fast battery replacement. Requires a 3/8″ wrench.
  • Typical ten (10) hours battery operation per full charge.

Part No. 2225420 for use with Garrett PD 6500i only.

Gel Cell Battery Modules

Garrett PD 6500i Walk through Metal Detector Battery Module, gel cell

  • Recommended for use as an emergency battery backup source, where the life cycle is limited (200 to 400 cycles).
  • 14 A-Hr Battery provides approximate 10 hours battery operation per full charge.

Part No. 2225410 for use with Garrett PD 6500i only.

NOTE: When equipping older walk-through detector units with this battery module, please check with the Garrett factory to acquire the proper software revision that may be required to provide an accurate charge indication.

 

Networking / Monitoring Accessories

iC Module

The iC Module allows users to communicate to a walk-through metal detector with a laptop or desktop PC through the network either wired or wireless. It allows control, real-time monitoring, and diagnostics from a remote location. The internal memory records all changes to settings and passenger traffic and alarm history for analytical evaluation.

  • Gain real-time access to all walk-through detectors on your network.
  • Utilize group management function to organize multiple walk-through by location and name (ex. North Entrance: WT1, WT2, etc.)
  • Adjust settings such as programs or base sensitivity for multiple walk-through detectors all at one time using the group management function.
  • Analyze security checkpoint alarm rates, patron counts, and other diagnostic statistics.
  • Check settings and diagnose issues with detectors on your network.

 

Garrett Wireless Sync SM 100

  • For use in operating multiple Garrett PD 6500i walk-through.

Part No. 1168800 for use with Garrett PD 6500i only.

Relay Module

Provides an isolated relay contact to control lights, doors, equipment. Internal dip switches provide 4 operating modes

  • Activate on alarm
  • Activate on the passage of each patron
  • Activate on an alarm, release on non-alarm
  • Activate on non-alarm for 5 seconds

Part No. 1171200 for use with Garrett PD 6500i or MZ 6100.

Desktop Remote Control with Zone Indication

For the remote operation of the detector

  • Includes a 50-foot cable. (optional lengths available)

Part No. 2266400 for use with Garrett PD 6500i only.

Garrett PD 6500i Remote Control

Part No. 1169400 for use with Garrett PD 6500i only.

MZ 6100 IR Remote Control

Part No. 1169500 for use with Garrett MZ 6100 only.

 

Mobility / Stability Accessories

Removable MagnaDolly

Removable wheel assembly for easy portability. 30″ width only.

Part No. 1168000 for use with Garrett PD 6500i only.

Stabilizer Base

2 included.

Part No. 1603901 for use with Garrett PD 6500i and MZ 6100.

Adhesive Floor Mount Kit

2 included.

Part No. 1604101 for use with Garrett PD 6500i and MZ 6100.

Transportation Braces

Provides a collapsible solution that supports the walk-through metal detector during transportation.

 

Security Test Pieces

Operational Test Piece (OTP)

Designed to FAA 3-gun test requirements.

Part No. 1600600 can be used with all Garrett model detectors.

Flat Test Piece (FTP)

Designed to represent a small knife or box cutter.

Part No. 1620570 can be used with all Garrett model detectors.

Cords / Cables / Misc. Accessories

5 ft. Charging Cord

Allows charging multiple walks through from a single power source.

Part No. 9436900 can be used with all Garrett model detectors.

10 ft. Jumper Cord

Allows multiple walk-through units to be linked to the same power source when operated nearby.

Part No. 9431900 can be used with all Garrett model detectors.

Cable Feed-through Kit

Allows waterproof connection of power cord through the top of a detection head.

Part No. 1605300 can be used with all Garrett model detectors.

Cover Support

Use with or without Garrett Environmental Cover (Part No. 1627030). Provides extra rain protection when secured to the top of a PD 6500i walk-through detector or when zipped into the Environmental Cover.

Part No. 9884900 for use with Garrett PD 6500i only.

Environmental Cover, Soft

High quality UV-resistant, anti-mildew nylon cover. Protects walk-through electronics from heavy rain and dust. Clear view window panels over touch-pads, optics, and zone indicators.

6″ Pocket Item Container

For placement of pocket items before the screening.

Part No. 1601200 for use with all Garrett model detectors.

Speed Assembly Kit

Quick screws with knurled hand knobs for easier hand tightening. Comes with 8 screws.

Eliminates the need for tools when assembling and disassembling a walk-through.

 

 

Garrett PD 6500i Walk through Metal Detector images

 

1 pd6500i Gallery 2000x1000 1 2 pd6500i Gallery 2000x1000 1

 

To contact or whats-app

00971507740209

00971506099456

Or you can follow us or practice us through

E-mail

 info@gold-rush.ae

our page on Facebook

https://www.facebook.com/GoldRushLLC

Our channel in YouTube
https://www.youtube.com/channel/UC534B6A7ikTaFJjoP2V5FMQ

With Gold Rush Metal Detection Systems and Gates Discover what is inside bags and cars Protect your facility, company or organization from any threat.
Contact us for the latest offers and prices

Thank you with the greetings of Gold Rush Security & Protection

]]>
https://www.securitysystem.ae/walk-through-metal-detector/pd-6500i/feed/ 1